 International Cub Cadet, 1961 | |
| Model history | |
|---|---|
| Model introduced | 1961 |
| Model discontinued | 1963 |
| Model status | Discontinued |
| No. produced | 59,406 |
| Superseded by | International Cub Cadet 70 |
| Engine Specification | |
| Engine make | Kohler |
| Engine model | K161 |
| Fuel type | gasoline |
| Power hp | 7 |
| Governed rpm | 3600 |
| Displacement cu in /(litre) | 16 ci |
| No. of Cylinders | 1 |
| Bore in (mm) | 2.875 in |
| Stroke in (mm) | 2.5 in |
| Cooling system | air |
| Naturally aspirated, Turbo or Supercharged | NA |
| Transmission Details | |
| Transmission type | sliding gear |
| Gearbox make | International |
| Forward | 3 |
| Reverse | 1 |
| Drive | 2-WD |
| Linkage Category | Unknown |
| Tyre Sizes (std/options) | |
| Front | 4.80/4.00-8 2-ply |
| Rear | 6-12 2-ply |
| Tractor Dimensions | |
| Length (inches/metres) | 65 in |
| Width (inches/meters) | 33 in |
| Height (inches/meters) | 38 in |
| Weight (nominal) lb/kg | 475 lb |
| Wheelbase | 43 in |
| Plow rating | 1-10" |
The Edrob/International Cub Cadet Tractor was built by International Harvester from 1961 to 1963.
Contents
Model History[edit | edit source]
- For Company history see
- Main article: International Harvester
International decided to enter the garden tractor market in 1961 with the Cub Cadet. Unlike some of the riding tractors on the market, the Cub Cadet was styled like a real tractor and it was the first garden tractor built by a major tractor manufacturer. It was also sold and serviced by highly respected International dealerships. The 7-hp Cub Cadet was powered by a 16 ci single-cylinder air-cooled Kohler engine and used a 3-speed transmission with V-belt drive from the engine to the transmission input shaft. Unlike International farm tractors, the Cub Cadet was painted a 2-tone yellow and white. It was an instant hit and 19,091[1] were built the first year.
Timeline[edit | edit source]
- Introduced ?
Factory locations[edit | edit source]
Specification[edit | edit source]
See Infobox for basic details
Variations and Options[edit | edit source]
Serial Numbers Information[edit | edit source]
| Year | Serial run[2][3][4] | Number Built[5] | Notes (Total built 59,406). |
|---|---|---|---|
| 1961 | 501-23674 | 19091 | |
| 1962 | 23675-49845 | 26051 | |
| 1963 | 49846-65457 | 14264 |
Preservation[edit | edit source]
No information on any of these tractors in preservation is currently available on here.
- Do you know of any examples to list ?
{{subst:PML Edrob/International Cub Cadet Tractor }}
Gallery[edit | edit source]
Add extra photos here please.
See also[edit | edit source]
- Collection related info
- Shows and Meets - events featuring tractors and other machinery
- Clubs Listing - List of clubs including various tractor marques
- Collections - list of private collections with tractors (add yours)
- Museums - includes museums featuring tractors (please add missing ones)
References / Sources[edit | edit source]
- Please supply some relevant references or sources for information for verification of data.
- ↑ Klancher, Lee 1996. International Harvester Photographic History, Motorbooks International, Osceola, Wisconsin, p.193
- ↑ Baumheckel, Ralph and Borghoff, Kent. 1997. International Harvester Farm Equipment Product History, American Society of Agricultural Engineers, St. Joseph, Michigan, pp.395-396
- ↑ Updike, Kenneth. 2002. Farmall Cub & Cub Cadet, MBI Publishing, St. Paul, Minnesote, p.115
- ↑ http://www.ihcubcadet.com
- ↑ Klancher, Lee 1996. International Harvester Photographic History, Motorbooks International, Osceola, Wisconsin, p.193
External Links[edit | edit source]
- Add any suitable (& Relevant) web links here
| This is a place holder template for a 'Model range' list Navbox. |
|---|
|
A navbox should replace it named in the form: - {{<manufacturers name> model range}} The basic code to create the page is; {{Navbox
|bodyclass =
|name = {{subst:PAGENAME}}<!-- sets the internal name to match template name so V.D.E links work -->
|title = [[Main article|xyz Model range<!-- add title link here-->
|titleclass =
|image =
|state =
|above = <!-- add a note or link to related pages e.g [[List of xyz models]] -->
|group1 = <!-- add Row label either a time period or product group-->
|list1 = {{•}}<!-- add links to models with the {{•}} template between them to space them out-->
|group2 = <!-- add Row label as above -->
|list2 = <!-- add more data-->
|group3 =
|list3 = {{tl|Navbox subgroup}}<!-- You can also use {{Navbox subgroup}} to split section into subgroups for list smaller grouped sections -->
|group4 =
|list4 =
|group5 =
|list5 =
|group6 =
|list6 =
... <!-- add more Group & list items if required-->
|group20 =
|list20 =
|below = <!-- add [[Category:<Manufacturers name>]] Here -->
}}<noinclude>
{{Documentation}}<!-- adds standard blank docs that usage notes can be added to -->
[[Category:Model range templates]]
[[Category:<manufacturers name]]
<!-- add any other relavent categories here -->
</noinclude>
Copy & paste into a new template via the red link treated in the article by changing the wiki link from this pages title to the new template with the 'correct name' then fill in the 'outline code' with data & save it. The template should then appear in the page, Then add a link to it from every page listed within the template. (Normally placed below the 'External links' section within the article - leave 2 (two) blank lines to create a gap above the navboxes). (Do NOT change this actual template/page it is used in many article pages !! )
|