Tractor & Construction Plant Wiki
Register
Advertisement
Tatra T111
T111S3 T111S3
Manufacturer Tatra NP
Predecessor Tatra T81
Successor Tatra T138
Class Heavy Truck
Body style(s) Conventional
Electric range 12 V 2x200 W dynamos(later models), 24 V 4.4 kW starter motor
Designer Hans Ledwinka
Engine V910
T111Engine
Manufacturer Tatra
Also called V910
Displacement 14.8 Litre
Cylinder bore 110 mm (4.3 in)
Piston stroke 130 mm (5.1 in)
Cylinder block alloy Cast Iron
Valvetrain OHV
Compression ratio 16.5:1
Fuel system Direct injection 2x inline injection pumps 6 elements each
Fuel type Diesel
Cooling system Aircooled
Power output 180-210 hp (132.5 kW-158kW) @ 1800-2250 rpm
Torque output 726 N·m (535 ft·lbf) @ 1400-1600 rpm

The Tatra T111 was a truck produced in Czechoslovakia by the Tatra company.

History[]

The T111 was developed and manufactured during World War II as heavy truck for use by the Wehrmacht. Production started in 1942 and continued for twenty years, ending in 1962 when it was replaced by the Tatra T138. Despite being built for the Nazi war machine, the vehicle ultimately played important role after the war ended. The Tatra T111 contributed significantly to the rebuilding effort during the postwar era, mainly in Eastern Europe and the USSR. To its chief designer however it brought the charges of treason and collaboration with Nazi regime after communists takeover of Czechoslovakia and contributed to the imprisonment of Tatra design guru Hans Ledwinka.

Design and technology[]

The design was based on the proven Tatra concept of a backbone tube chassis construction with swing half axles, a modular gearbox and differential assemblies. The main advantages of the central load carrying backbone tube are its high torsion and bend strength, which protects the truck body against load stresses. The secondary advantage is that it houses all important parts of the drivetrain. Due to its torsional stiffness and use of differentials locks the vehicle had an exceptional offroad capabilities. Of note was the ability to use a cranking handle to start the engine.

Engine[]

Model V910 - the first Tatra aircooled powerplant V12 75 degree V developed from Tatra V850 engine intended for use in Tatra 103 (Sd Kfz. 234 Puma).The engines had power output of 210 horsepower at 2250 RPM mainly for war use (An average life expectancy during combat for Wehrmacht was 6 hours.) which was later reduced to 180 hp at 1800 rpm to increase reliability. The engine has three camshafts and originally by covered chain driven two cooling fans, later was the belt drive used (marked T111A).

Chassis[]

Central backbone tube, front and rear axles with independent swing half axles. Front axle suspended on quarter elliptic leaf springs, rear axles suspended on half elliptic longitunal leaf spring. The service brakes were air all-round drums, parking brake was mechanical acting on rear end of backbone tube output shaft via rotating drum.

  • Front track = 2,080 mm (81.9 in)
  • Rear track = 1,800 mm (70.9 in)
  • Wheelbase = 4,175 mm (164.4 in)+1,200 mm (47.2 in)
  • Road clearance = 300 mm (11.8 in)

Transmission[]

  • Drive - 6x6 Selectable front wheels drive
  • Main gearbox - 4+1 (1 and 2 gears synchronized)
    • gear ratios - 5.29, 2.78, 1.62, 1.00, R 5.91
      • Auxiliary gearbox - 2 speed
        • gear ratios - offroad - 4.52, highway - 1.82
  • Differentials - ratio 3.19
  • Clutch - 2x plate, dry

Bodywork[]

The cab originally used wood for its construction due to strategic unavailability of steel during the war, in later years the wooden frame was steel plated and the last models used an all-steel cabin. The vehicle was capable of a top speed of approximately 65 km/h (40 mph). The maximum cargo capacity was 10.3 tonnes and it had the ability to tow up to 22 tonnes trailer.

Brno, Řečkovice, Tatra T 111 C

T111 army tanker

Production[]

The Tatra T111 was in production for 20 years, with a total of approximately 34,000 units made. The T111 engine was widely used in the variety of other vehicles such as a heavy tractor T141, a railway car M 131, airport tugs and pontoon bridges used by the army. The engine was also "halved" to create an inline 6 cylinder version for the Praga V3s 6x6 light utility military truck and civilian Praga S5T light truck. Based on the T111 V12 engine was created V8 version for the T128 4x4 truck for the Czech Army, designed mostly from the T111 parts. T111 main product range was in flatbed , tipper , tanker and crane configuration.

  • Models
T111VVN

T111VVN military

T111 R - Flatbed
T111 NR - Flatbed with auxiliary gearbox powered winch
T111 N Special - Flatbed with foldable sides , winch military specs
T111 S - Three-way tipper with wooden sides
T111 S2 - All-steel three-way tipper heavy duty
T111 C - Tanker
T111 D - Bodybuilders chassis

Legacy[]

The Tatra T111 exploits at Siberia had earned its reputation, and its legendary reliability contributed to its iconic status among those who had driven and lived in those conditions. The T111 concept and technology continued its evolution in following years with successful line of Tatra models.

References[]

SchwerlastZugmaschineTatra141

Tatra141.jpg

Commons-logo
Wikimedia Commons has media related to:
Smallwikipedialogo This page uses some content from Wikipedia. The original article was at Tatra 111. The list of authors can be seen in the page history. As with Tractor & Construction Plant Wiki, the text of Wikipedia is available under the Creative Commons by Attribution License and/or GNU Free Documentation License. Please check page history for when the original article was copied to Wikia


Advertisement