|This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed. (July 2011)|
|1995-1998 Land Rover Range Rover (P38A) 4.0 SE wagon 05.jpg|
|Assembly||Solihull, United Kingdom|
|Predecessor||Range Rover "Classic"|
|Successor||Range Rover (L322)|
|Class||Luxury large off-road 4x4|
|Body style(s)||5-door SUV|
|Layout||Front engine / four-wheel drive|
|Engine(s)||BMW M51 Turbodiesel I6|
|Wheelbase||2,746 mm (108.1 in)|
|Length||4,712 mm (185.5 in)|
|Width||1,890 mm (74.4 in)|
|Height||1,819 mm (71.6 in)|
The Range Rover (P38A) is the second-generation Range Rover model from British car maker Land Rover. It was launched in 1994, 24 years after the introduction of the first-generation Range Rover. It included an updated version of the Rover V8 engine, with the option of a 2.5 litre BMW six-cylinder turbo-diesel. The new model offered more equipment and premium trims, positioning the vehicle above the Land Rover Discovery to face the increased competition in the SUV marketplace.
In 1999 the Range Rover V8 received a new Bosch engine management system from the BMW 7 Series. This replaced the Lucas GEMS system. The diesel edition received an EGR system, which came with a plastic inlet manifold. A modulator sends back part of the exhaust gas into the manifold, thus mixing hot exhaust gas via a vacuum pump into the cold air from the intercooler.
The second generation incorporated new engine management and improved electronic air suspension (called EAS) that allowed automatic, speed proportional height adjustment. This could also detect when the vehicle is not parked horizontally and attempt to raise itself to maximum height for horizontal levelling. Height was also adjustable manually.
The R380 gearbox is basically the same as in the previous Range Rover, or Discovery 300tdi The primary shaft is different with a small input diameter for the spigot bearing inside the BMW flywheel and the output shaft has been changed to allow for the different Borg Warner Box. The automatic gearbox is the same ZF 4HP22, as is the Discovery TD5 or V8.
The Borg Warner transfer box no longer had direct control of High/Low range gears meaning that the vehicle has to nearly stop before shifting from high to low range and the lever from the Classic model has been replaced by an electric control on the dashboard for the manual and an H-pattern gate on the automatic gear lever. The transfer case's chain and sprockets have been reinforced. Differentials have in some models been upgraded to a four pinion version, notably in the V8 edition. Also, four-wheel traction control was added to the vehicle, which previously was rear wheel only.
The chassis was also made stronger and new welding techniques were used. This was the last Range Rover available with a manual gearbox and a classic transfer box. Other features included anti-lock braking system and in some automatic gearbox models two-wheel traction control — although later models saw this feature applied to all four wheels.
|This page uses some content from Wikipedia. The original article was at Range Rover (P38A). The list of authors can be seen in the page history. As with Tractor & Construction Plant Wiki, the text of Wikipedia is available under the Creative Commons by Attribution License and/or GNU Free Documentation License. Please check page history for when the original article was copied to Wikia|