|Founded||1 October 1980|
|Headquarters||Tonsley Park, South Australia|
|Key people||Mutsuhiro Oshikiri, President and CEO|
|Industry||Import, distribution and marketing|
|Parent||Mitsubishi Motors Corporation|
Mitsubishi Motors Australia Limited (MMAL) is a fully owned subsidiary of parent company Mitsubishi Motors Corporation of Japan. Its Australian administrative headquarters are located at Tonsley Park (Clovelly Park, South Australia), with branch offices in Brisbane, Sydney, Melbourne and Perth. The company was established in 1980 and began vehicle manufacturing in that year, having taken over the facilities of Chrysler Australia. Australian production ceased in 2008 and since that time the company has been exclusively a vehicle importer. MMAL operates spare parts facilities in Adelaide and Sydney.
Construction of the vehicle assembly plant at Tonsley Park was commenced by the then owners, Chrysler Australia, in 1963, and the assembly plant was opened in October 1964. Chrysler's previous plant at Keswick then shut down and sold to leading Adelaide furniture retailer Le Cornu who renovated the building for its grand re-opening in 1973. As of December 2013, the Keswick site is still the home of Le Cornu in Adelaide.
In 1968, Chrysler opened an engine manufacturing plant south of Adelaide at Lonsdale, to provide engines for the popular Chrysler Valiant models that were being produced at their Tonsley Park facility.
Mitsubishi takeover Edit
After the acquisition by parent company Chrysler of a 15 percent interest in Mitsubishi Motors Corporation in 1971, Chrysler Australia began building Mitsubishi-designed Chrysler-branded vehicles, namely the Chrysler Valiant Galant (later Chrysler Galant), based on the 1972–1977 Mitsubishi Galant and the Chrysler Sigma, a variant of the 1977–1985 Mitsubishi Galant. In 1979 Mitsubishi Motors Corporation and Mitsubishi Corporation each acquired a one sixth equity in Chrysler Australia and in April 1980 the two companies purchased the remaining shares in the company from the US Chrysler Corporation. The company name was changed to Mitsubishi Motors Australia Limited in October 1980. Production of the popular Sigma range of vehicles continued under the Mitsubishi name until 1987 with its eventual replacement, the Magna, having been released in 1985. Colt production, which had commenced in 1982, ended in 1990, with no locally manufactured replacement.
The Magna, like its forebear the Sigma, was based on the Japanese Galant. Input from MMAL resulted in a wider car than the Japanese donor model to suit the Australian market and to compete with the popular Ford Falcon and Holden Commodore. A station wagon variant was added to the model lineup in 1987. The Magna received several model refreshes during the 1990s including a luxury variant named Verada. However, by the early 2000s, it was clear that the Magna / Verada line, now in its third iteration had aged considerably. A facelift to the Magna / Verada line in 2003 failed to lift sales. After lobbying from Mitusubishi Motors Australia Limited (MMAL) approval for construction of a new vehicle was granted by Mitsubishi Motors Corporation. Funding was provided to re-engineer the Tonsley Park plant with the result that a new vehicle, the Mitsubishi 380, was delivered to the market in late 2005.
In 2003 MMAL gained approval from MMC to create Mitsubishi Research and Development Australia (MRDAus) with a budget of $30 million. MRDAus was to be the fourth global Mitsubishi Research and Development Centre. MMAL's proving ground at Tailem Bend was to be upgraded including the addition of a high speed oval and numerous other proving ground facilities and the Testing and Proving group's laboratories at MMAL headquarters in Tonsley Park was also to be upgraded. MRDAus was originally tasked with completing Mitsubishi 380 Testing and Proving prior to the start of volume production. MRDAus also negotiated substantial job share for the testing and proving of the PS41L, the codename for a stretched 380 for the US market. Unfortunately with the financial woes facing MMC globally and the cancelling of the PS41L program MRDAus was unable to reach its full potential. In late 2004 after expanding to 90 personnel the MRDAus expansion was halted before the 380 was even launched. A security fence around most of the expanded Tailem Bend site was almost completed and the earthworks for the high speed oval had begun when work was halted in 2004.
Sales challenges Edit
Mitsubishi Motors Corporation's financial and legal issues weighed hard on MMAL, with public perception of the viability of the company reaching an all-time low in 2004. Company research conducted in mid-2004 revealed that roughly four out of every five believed that Mitsubishi would cease production in Australia.
The withdrawal of DaimlerChrysler from its involvement with Mitsubishi Motors Corporation in 2004, along with the revitalisation plan that called for the closure of the Lonsdale engine plant, did not help the public's perception of MMAL as a viable company.
MMAL ended 2004 with a stockpile of approximately 4,000 unsold Magnas and Veradas. To restore consumer confidence in the brand and to clear the model backlog, a series of television advertisements began airing in December 2004. Centred on Mitsubishi Australia's then Chief executive officer, Tom Phillips, the advertisements promoted the introduction of an industry-first five-year/130,000 kilometre warranty. Mitsubishi reworked a slogan from former Chrysler chairman Lee Iacocca, concluding their commercials with the tagline, "If you can find a better-built, better-backed car anywhere, then buy it". The campaign successfully boosted sales and allowed the backlog to be cleared.
The Mitsubishi 380, the successor vehicle to the Magna, raised hopes for the future of MMAL when launched. Hopes stemmed from the sales success that the Magna experienced when it was launched and the fact that the Australian automobile market was growing at the time. However, the 380 sold poorly from its introduction and failed to meet expected sales targets. This resulted in a reduction in daily production volume from 180 to 50 vehicles per day, along with further reductions in the workforce.
Sales of other Mitsubishi Motors Corporation vehicles began to show improvement in Asian and European markets as new vehicles were introduced during 2006. These vehicles were also introduced into the Australian market, boosting MMAL's Australian sales into the segments that these vehicles occupied, though this did nothing to help their sales of locally manufactured product.
Cessation of local production and corporate restructure Edit
On 5 February 2008, it was announced that MMAL would cease production of the 380 at the Tonsley Park plant, effective at the end of March 2008. The two-page statement released announced they would pursue a "full import strategy" for the Australian market due to unviable 380 sales. The last Mitsubishi 380 sedan left the production line on 27 March 2008. Coinciding with the last vehicles to leave the line was the redundancy of about 500 workers, with another 430 staying for another 12 months. Those remaining decommissioned the plant and produced a stockpile of spare parts destined to last ten years.
By late 2009, MMAL had removed the last piece of manufacturing equipment from the Tonsley Park assembly plant. Ownership of the plant was handed over to the Government of South Australia on 16 December 2009.
At the same time, MMAL began a restructure of the remaining divisions of the company. This restructure concluded in mid-2009 and saw staff numbers reduced to around 300 through redundancy and outsourcing.
The majority of the remaining staff are involved with sales and marketing activities, though MMAL retains some capability to perform any design changes that may be required to fit Mitsubishi Motors Corporation's global products into the Australian market.
MMAL has retained its offices in Sydney, Melbourne, Brisbane and Perth, with only minor changes to structure as these offices have only ever been sales based offices.
Redevelopment of plant sites Edit
The 61-hectare Tonsley site is being redeveloped for retail, Technical and further education facilities, hi-tech manufacturing, with future residential plans.
The Lonsdale engine manufacturing plant was transformed into the Onkaparinga Recycling plant in 2010.
Vehicle lineup Edit
Since the end of local 380 production, the entire vehicle range that MMAL sells is imported from Japan with the i-MiEV, Lancer, Outlander and Pajero, and from Thailand with the Mirage, Challenger and Triton.
Current passenger cars
- Mitsubishi i-MiEV
- Mitsubishi Mirage
- Mitsubishi Lancer
- Mitsubishi Lancer Evolution
- Mitsubishi ASX
- Mitsubishi Outlander
- Mitsubishi Challenger
- Mitsubishi Pajero
Current commercial vehicles
Production and sales, 1991–2007 Edit
- ↑ 1.0 1.1 The Macquarie Dictionary of Motoring, 1986, page 310
- ↑ Tony Davis, Aussie Cars, 1987, page 165
- ↑ McDonald, Neil (3 March 2004). "Magna's looks put dent in sales", The Australian. Retrieved on 4 August 2007.
- ↑ 4.0 4.1 Carey, John (2005). Wheels magazine: Special Edition. Wheels magazine, 50.
- ↑ "Mitsubishi to reduce working week", The Age (10 November 2004). Retrieved on 28 April 2008.
- ↑ "Rise of the Mitsubishi man", Asia Africa Intelligence Wire (19 December 2004).
- ↑ "Mitsubishi plant to close in March". Fairfax Media (5 February 2008). Retrieved on 2008-02-05.
- ↑ "Mitsubishi shuts its doors in Adelaide", The Sydney Morning Herald (28 March 2008). Retrieved on 24 April 2008.
- ↑ Pettendy, Marton (2010-06-04). "Chinese Mitsubishis not for Oz". GoAuto. John Mellor. Retrieved on 2010-07-12.
- ↑ Government releases Tonsley master plan at ABC News (Australia), 21 March 2012
|This page uses some content from Wikipedia. The original article was at Mitsubishi Motors Australia. The list of authors can be seen in the page history. As with Tractor & Construction Plant Wiki, the text of Wikipedia is available under the Creative Commons by Attribution License and/or GNU Free Documentation License. Please check page history for when the original article was copied to Wikia|