FANDOM


APM Terminals WJ Grimes

Intermodal ship-to-rail transfer of containerized cargos at APM Terminals in Portsmouth, VA.

Intermodal freight transport involves the transportation of freight in an intermodal container or vehicle, using multiple modes of transportation (rail, ship, and truck), without any handling of the freight itself when changing modes. The method reduces cargo handling, and so improves security, reduces damages and losses, and allows freight to be transported faster. Reduced costs over road trucking is the key benefit for intracontinental use. This may be offset by reduced timings for road transport over shorter distances.

HistoryEdit

OriginsEdit

Intermodal transportation goes back to the 18th century and predates the railways. Some of the earliest containers were those used for shipping coal on the Bridgewater Canal in England in the 1780s. Coal containers (called "loose boxes" or "tubs") were soon deployed on the early canals and railways and were used for road/rail transfers (road at the time meaning horse drawn vehicles).

Wooden coal containers used on railways go back to the 1830s on the Liverpool and Manchester Railway. In 1841 Isambard Kingdom Brunel introduced iron containers to move coal from the vale of Neath to Swansea Docks. By the outbreak of the First World War the Great Eastern Railway was using wooden containers to trans-ship passenger luggage between trains and sailings via the port of Harwich.

The early 1900s saw the first adoption of covered containers, primarily for the movement of furniture and intermodal freight between road and rail. A lack of standards limited the value of this service and this in turn drove standardisation. In the U.S. such containers, known as "lift vans', were in use from as early as 1911.

Early containersEdit

In the United Kingdom containers were first standardised by the Railway Clearing House (RCH) in the 1920s, allowing both railway owned and privately owned vehicles to be carried on standard container flats. By modern standards these containers were small, being 1.5 or 3.0 meters long (5 or 10 ft), normally wooden and with a curved roof and insufficient strength for stacking. From 1928 the London, Midland and Scottish Railway offered "door to door" intermodal road-rail services using these containers. This standard failed to become popular outside the United Kingdom.

Pallets made their first major appearance during World War II, when the United States military assembled freight on pallets, allowing fast transfer between warehouses, trucks, trains, ships, and aircraft. Because no freight handling was required, fewer personnel were required and loading times were decreased.

Truck trailers were first carried by railway before World War II, an arrangement often called "piggyback", by the small Class I railroad, the Chicago Great Western in 1936. The Canadian Pacific Railway was a pioneer in piggyback transport, becoming the first major North American railway to introduce the service in 1952. In the United Kingdom the big four railway companies offered services using standard RCH containers which could be craned on and off the back of trucks. Moving companies such as Pickfords offered private services in the same way.

ContainerizationEdit

Roadrailers

Highway semi-trailers in piggyback service at Albuquerque, New Mexico.

In the 1950s new standardized steel Intermodal containers started to revolutionize freight transportation based on a specification from the United States Department of Defense. The International Organization for Standardization (ISO) then issued standards based upon the U.S. Department of Defense standards between 1968 and 1970.

The White Pass and Yukon Route railway acquired the world's first container ship, the Clifford J. Rogers, built in 1955, and introduced containers to its railway in 1956. In the United Kingdom the modernisation plan and in turn the Beeching Report strongly pushed containerization. The British Railways freightliner service was launched carrying 8-foot (2.4 m) high pre-ISO containers. The older wooden containers and the pre-ISO containers were rapidly replaced by 10-foot (3.0 m) and 20-foot (6.1 m) ISO standard containers, and later by 40-foot (12 m) containers and larger.

In the U.S., starting in the 1960s the use of containers increased steadily. Rail intermodal traffic tripled between 1980 and 2002, according to the Association of American Railroads (AAR), from 3.1 million trailers and containers to 9.3 million. Large investments were made in intermodal freight projects. An example was the USD $740,000,000 Port of Oakland intermodal rail facility begun in the late 1980s.[1][2]

Since 1984, a mechanism for intermodal shipping known as double-stack rail transport has become increasingly common. Rising to the rate of nearly 70% of United States intermodal shipments, it transports more than one million containers per year. The double-stack rail cars design significantly reduces damage in transit and provides greater cargo security by cradling the lower containers so their doors cannot be opened. A succession of large, new domestic container sizes was introduced to increase shipping productivity. In Europe the more restricted loading gauge has limited the adoption of double-stack cars. However, in 2007 the Betuweroute was completed, a railway from Rotterdam to the German industrial heartland, which may accommodate double stacked containers in the future. Other countries, like New Zealand, have numerous low tunnels and bridges, which limits expansion for economic reasons.

Since electrification generally predated double stacking, the overhead wiring was too low to accommodate it. However, India is building some freight only corridors with the overhead wiring at 7.45 m above rail, which is high enough.[3]

Containers and container handlingEdit

See also: Intermodal freight shipping container
Intermodal ship-to-rail transfer

Intermodal ship-to-rail transfer of containerized cargos at the Port in Long Beach, California.

Containers, also known as intermodal containers or ISO containers because the dimensions have been defined by ISO, are the main type of equipment used in intermodal transport, particularly when one of the modes of transportation is by ship. Containers are 8-foot (2.4 m) wide by 8-foot (2.4 m) high. Since introduction, there have been moves to adopt other heights, such as 8-foot-6-inch (2.6 m), 9-foot-6-inch (2.9 m) and 10-foot-6-inch (3.2 m). The most common lengths are 20 feet (6.1 m) nominal or 19 feet (5.8 m) - 10+1/2 in (10.01 m) actual, 40 feet (12 m), 48 feet (15 m) and 53 feet (16 m), although other lengths exist. In countries where the railway loading gauge is sufficient, truck trailers are often used. Variations exist, including open-topped versions covered by a fabric curtain are used to transport larger loads. A container called a tanktainer, with a tank inside a standard container frame, carries liquids. Refrigerated containers are used for perishables.

Handling equipment can be designed with intermodality in mind, assisting with transferring containers between rail, road and sea. These can include:

  • Transtainers for transferring containers from sea-going vessels onto either trucks or rail wagons. A transtainer is mounted on rails with a large boom spanning the distance between the ship's cargo hold and the quay, moving parallel to the ship's side.[4]
  • Gantry cranes, also known as straddle carriers, are able to straddle rail and road vehicles, allowing for quick transfer of containers. A spreader beam moves in several directions allowing accurate positioning of the cargo.[4]
  • Grappler lift, which is very similar to a straddle carrier.
  • Reach stackers are fitted with lifting arms as well as spreader beams and lift containers to swap bodies or stack containers on top of each other.[4]
  • Swap body units are not strong enough to be stacked, but they have folding legs under their frame but they can be moved between trucks without using a crane.

TransportationEdit

Container shipsEdit

CMA CGM Balzac

The 300-meter-long container ship CMA CGM Balzac

Container ships are used to transport containers by sea. These vessels are custom-built to hold containers. Some vessels can hold thousands of containers. Their capacity is often measured in TEU or FEU. These initials stand for "twenty-foot equivalent unit," and "forty-foot equivalent unit," respectively. For example, a vessel that can hold 1,000 40-foot containers or 2,000 20-foot containers can be said to have a capacity of 2,000 TEU. After the year 2006, the largest container ships in regular operation are capable of carrying in excess of 15,000 TEU.[5][6]

Onboard ships they are typically stacked up to seven units high.

A key consideration in the size of container ships is that larger ships exceed the capacity of important sea routes such as the Panama and Suez canals. The largest size of container ship able to traverse the Panama canal is referred to as Panamax, which is presently around 5,000 TEU. A third set of locks is planned as part of the Panama Canal expansion project to accommodate container ships up to 12,000 TEU in future, comparable to the present Suezmax.[citation needed]

It costs about $8000[who?][when?] to ship a container from East Asia to North America[where?] when oil is at $100/barrel. As the price of oil increases, shipping costs increase.

Very large container ships also require specialized deep water terminals and handling facilities. The container fleet available, route constraints, and terminal capacity play a large role in shaping global container shipment logistics.[7][8]

RailwaysEdit

DTTX 724681 20050529 IL Rochelle

A portion of a "double stack" container train operated by Union Pacific Railroad, the containers are owned by Pacer Stacktrain, the cars by DTTX.

In North America, containers are often shipped by rail in container well cars. These cars resemble flatcars but the newer ones have a container-sized depression, or well, in the middle (between the bogies or "trucks") of the car. This depression allows for sufficient clearance to allow two containers to be loaded in the car in a "double stack" arrangement. The newer container cars also are specifically built as a small articulated "unit", most commonly in components of three or five, whereby two components are connected by a single bogie as opposed to two bogies, one on each car. (The photo above under "Equipment" shows an example of the new setup.) Double stacking is also used in parts of Australia. On some older railways, particularly in the United Kingdom, the use of well cars is necessary to carry single stacked large containers within the loading gauge.

It is also common in North America to transport semi-trailers on railway flatcars or spine cars, an arrangement called "piggyback" or TOFC (trailer on flatcar) to distinguish it from container on flatcar (COFC). Some flatcars are designed with collapsable trailer hitches so they can be used for trailer or container service.[9] Such designs allow trailers to be rolled on from one end, though lifting trailers on and off flatcars by specialized loaders is more common. TOFC terminals typically have large areas for storing trailers pending loading or pickup.[10]

If the rail line has been built with sufficient vertical clearance then Double-stack rail transport can be used. Where lines are electrified with overhead electric wiring double stacking is normally not possible.

When carried by rail, containers can be loaded on flatcars or in container well cars. In Europe, stricter railway height restrictions (smaller loading gauge and structure gauge) and overhead electrification prevent containers from being stacked two high, and containers are hauled one high either on standard flatcars or other railroad cars. Taller containers are often carried in well cars (not stacked) on older European railway routes where the loading gauge is particularly small.

Narrow gauge railways of 610 mm (2 ft)  gauge have smaller wagons that do not readily carry ISO containers, nor do the 30-foot (9.14 m) long and 7-foot (2.13 m) wide wagons of the 762 mm (2 ft 6 in) gauge Kalka-Shimla Railway. Wider narrow gauge railways of e.g. 914 mm (3 ft)  and 1,000 mm (3 ft 3+38 in) gauge can take ISO containers, provided that the loading gauge allows it.

Trucks Edit

Intermodal Transport by Truck

A truck transporting a container on Interstate 95 in South Florida.

Trucking is frequently used to connect the "linehaul" ocean and rail segments of a global intermodal freight movement. This specialized trucking that runs between ocean ports, rail terminals, and inland shipping docks, is often called drayage, and is typically provided by dedicated drayage companies or by the railroads.[11]

BargesEdit

Barges utilising ro-ro and container-stacking techniques transport freight on large inland waterways such as the Rhine/Danube in Europe and the Mississippi River in the U.S.[4]

LandbridgesEdit

Land Bridge

Image of a land bridge.

The term landbridge or land bridge is commonly used in the intermodal freight transport sector in reference to a containerized ocean freight shipment which travels across a large body of land for a significant part of the trip, en-route to its final destination; Of which the land portion of the trip is referred to as the "landbridge" and the mode of transport used is rail transport. There are three applications for the term.

  • Land bridge - An intermodal container shipped by ocean vessel from country A to country B, land bridges across an entire body of land/country/continent, en-route. For example, a container shipment from China to Germany, is loaded onto a ship in China, unloads at a Los Angeles (California) port and travels via rail transport to a New York (New York) port, and loads on a ship for Hamburg.
  • Mini Land bridge - An intermodal container shipped by ocean vessel from country A to country B, passes across a large portion of land in either country A or B. For example, a container shipment from China to New York (New York), is loaded onto a ship in China, unloads at a Los Angeles (California) port and travels via rail transport to New York (New York), the final destination.
  • Micro Land bridge - An intermodal container shipped by ocean vessel from country A to country B, passes across a large portion of land to reach an interior inland destination. For example, a container shipment from China to Denver (Colorado), is loaded onto a ship in China, unloads at a Los Angeles (California) port and travels via rail transport to Denver (Colorado), the final destination.[12][13]

The term reverse landbridge refers to a micro land bridge from an east coast port (as opposed to a west coast port in the previous examples) to an inland destination.

Load Securing in Intermodal ContainersEdit

According to the European Commission Transportation Department “it has been estimated that up to 25% of accidents involving trucks can be attributable to inadequate cargo securing”.[14] Cargo that is improperly secured can cause severe accidents and lead to the loss of cargo, the loss of lives, the loss of vehicles, ships and airplane; not to mention the environmental hazards it can cause. There are many different ways and materials available to stabilize and secure cargo in containers used in the various modes of transportation. Conventional Load Securing methods and materials such as steel banding and wood blocking & bracing have been around for decades and are still widely used. In the last few years the use of several, relatively new and unknown Load Securing methods have become available through innovation and technological advancement including polyester strapping and -lashing, synthetic webbings and Dunnage Bags, also known as air bags.

Companies Edit

Biggest ISO container companies Edit

Top 20 container shipping companies in order of TEU capacity, 23 Jan 2011
Company TEU capacity[15] Number of ships
A.P. Moller-Maersk Group 2,150,888 545
Mediterranean Shipping Company S.A. 1,638,962 414
CMA CGM 1,100,007 384
American President Lines 589,879 147
Evergreen Marine Corporation 554,725 152
Hapag-Lloyd 541,811 124
COSCO 498,437 134
CSAV 469,428 128
Hanjin Shipping 448,051 98
China Shipping Container Lines 440,236 122
NYK Line 365,034 95
Mitsui O.S.K. Lines 363,188 94
Orient Overseas Container Line 353,338 77
Hamburg Süd 338,778 109
Zim Integrated Shipping Services 322,685 96
K Line 318,193 82
Yang Ming Marine Transport Corporation 313,379 77
Hyundai Merchant Marine 271,604 52
Pacific International Lines 227,649 126
UASC 199,082 50

galleryEdit

</gallery>

See also Edit

ReferencesEdit

  1. Initial Study: Intermodal Interface Demonstration Project, Port of Oakland, Oakland, California, Earth Metrics and Korve Engineerning, December 20, 1989
  2. Port of Oakland Official Site: Facts and Figures (2006)
  3. Railway Gazette International August 2009, p. 17
  4. 4.0 4.1 4.2 4.3 Rushton, A., Oxley, J., Croucher, P. (2004) The Handbook of Logistics and Distraibution Kogan: London
  5. AXSliner.com
  6. Julie Holt (Friday, 28 May 2010). "Ebba Mærsk beats world record". Ingeniøren. Retrieved on 11 June 2010.
  7. The Scottish Government - Container Transhipment and Demand for Container Terminal Capacity in Scotland
  8. Halifax Port Authority Presentation
  9. Atchison, Topeka & Santa Fe TOFC / COFC Cars Album
  10. Maps.Google.com
  11. Forbes Logistics 2006
  12. Land-bridge, mini-bridge, and micro-bridge: A question of getting it together; R K Miller,1977; American Society of Traffic and Transportation.
  13. Geography of Transportation; Edward James Taaffe, Howard L. Gauthier, and Morton E. O'Kelly, 1996.
  14. "European Commission Transport". Road Safety: Best practice guidelines on cargo securing and abnormal transport (Updated April 9, 2009). Retrieved on November 16, 2009.
  15. You must specify title = and url = when using {{cite web}}."". Alphaliner Top 100: Operated fleets www.alphaliner.com/top100/ (May 2010).

BibliographyEdit

  • DeBoer, David J. (1992). Piggyback and Containers: A History of Rail Intermodal on America's Steel Highway. Golden West Books, San Marino, CA. ISBN 0-87095-108-4.
  • European Intermodal Association (2005). Intermodal Transport in Europe. EIA, Brussels. ISBN 90-901991-3-6
  • Sidney, Samuel (1846). Gauge Evidence: The History and Prospects of the Railway System. Edmonds, London, UK. No ISBN.

External linksEdit

Smallwikipedialogo This page uses some content from Wikipedia. The original article was at Intermodal freight transport. The list of authors can be seen in the page history. As with Tractor & Construction Plant Wiki, the text of Wikipedia is available under the Creative Commons by Attribution License and/or GNU Free Documentation License. Please check page history for when the original article was copied to Wikia

Wiktionary-logo-en
Look up Intermodal freight transport in
Wiktionary, the free dictionary.


Community content is available under CC-BY-SA unless otherwise noted.