Tractor & Construction Plant Wiki
Hudson Motor Car Company
Fate Merged
Successor American Motors Corporation
Founded 1909
Defunct 1954
Headquarters Detroit, Michigan, United States
Key people Joseph L. Hudson, Roy D. Chapin
Industry Automobile
Products Vehicles

The Hudson Motor Car Company made Hudson and other brand automobiles in Detroit, Michigan, USA, from 1909 to 1954. In 1954, Hudson merged with Nash-Kelvinator Corporation to form American Motors. The Hudson name was continued through the 1957 model year, after which it was dropped.

Company strategy

1910 Hudson Model 20 Roadster

1917 Hudson Phaeton

The name "Hudson" came from Joseph L. Hudson, a Detroit department store entrepreneur and founder of Hudson's department store, who provided the necessary capital and gave permission for the company to be named after him. A total of eight Detroit businessmen formed the company on February 20, 1909,[1] to produce an automobile which would sell for less than US$1,000. One of the chief "car men" and organizer of the company was Roy D. Chapin, Sr., a young executive who had worked with Ransom E. Olds. (Chapin's son, Roy Jr., would later be president of Hudson-Nash descendant American Motors Corp. in the 1960s). The company quickly started production, with the first car driven out of a small factory in Detroit on July 3, 1909.

The new Hudson "Twenty" was one of the first low-priced cars on the American market and very successful with more than 4,000 sold the first year. The 4,508 units made in 1910 was the best first year's production in the history of the automobile industry up to that time and put the newly formed company in 17th place industry-wide, "a remarkable achievement at a time."[2] Production in 1911 increased to 6,486.[3]

The company had a number of firsts for the auto industry; these included dual brakes, the use of dashboard oil-pressure and generator warning lights, and the first balanced crankshaft, which allowed the Hudson straight-six engine, dubbed the "Super Six" (1916), to work at a higher rotational speed while remaining smooth, developing more power for its size than lower-speed engines. Most Hudsons until 1957 had straight-6 engines. The dual brake system used a secondary mechanical emergency brake system, which activated the rear brakes when the pedal traveled beyond the normal reach of the primary system; a mechanical parking brake was also used. Hudson transmissions also used an oil bath and cork clutch mechanism that proved to be as durable as it was smooth.

At their peak in 1929, Hudson and Essex produced a combined 300,000 cars in one year, including contributions from Hudson's other factories in Belgium and England; a factory had been built in 1925 in Brentford in London.[4] Hudson was the third largest U.S. car maker that year, after Ford Motor Company and Chevrolet.[5]

Essex and Terraplane

1929 Hudson Model R 4-Door Landau Sedan

1927 Hudson Super Six

1931 Hudson 4-Door Sedan

1934 Hudson Eight Convertible Coupé

1941 Hudson pickup

1937 Terraplane pickup

In 1919 Hudson introduced the Essex brand line of automobiles; the line was originally for budget minded buyers, designed to compete with Ford and Chevrolet, as opposed to the more up-scale Hudson line. The Essex found great success by offering one of the first affordable sedans, and combined Hudson and Essex sales moved from seventh in the U.S. to third by 1925.[6]

In 1932, Hudson began phasing out its Essex nameplate for the modern Terraplane brand name. The new line was launched on July 21, 1932, with a promotional christening by Amelia Earhart. For 1932 and 1933, the restyled cars were named Essex-Terraplane; from 1934 as Terraplane, until 1938 when the Terraplane was re-named the Hudson 112. Hudson also began assembling cars in Canada, contracting Canada Top and Body to build the cars in their Tilbury, Ontario, Canada, plant. In England Terraplanes built at the Brentford factory were still being advertised in 1938.[7]

An optional accessory on some 1935-1938 Hudson and Terraplane models was a steering column-mounted electric gear pre-selector and electro-mechanical automatic shifting system, known as the "Electric Hand", manufactured by the Bendix Corporation. This took the place of the floor-mounted shift lever, but required conventional clutch actions. Cars equipped with Electric Hand also carried a conventional shift lever in clips under the dash, which could be pulled out and put to use in case the Electric Hand should ever fail. Hudson was also noted for offering an optional vacuum-powered automatic clutch, starting in the early 1930s.


1937 Hudson Custom Eight

1938 Hudson 112 coupe

1939 Hudson Country Club Six Series 93 Convertible Coupé

1941 Hudson Coupé

Hudson dealer in Louisiana, ca. 1930-1945

In 1936, Hudson revamped its cars, introducing a new "radial safety control" / "rhythmic ride" suspension which suspended the live front axle from two steel bars, as well as from leaf springs. Doing this allowed the use of longer, softer leaf springs ("rhythmic ride"), and prevented bumps and braking from moving the car off course. The 1936 Hudsons were also considerably larger inside than competitive cars — Hudson claimed a 145-cubic-foot (4.1 m³) interior, comparing it to 121 cubic feet (3.4 m³) in the "largest of other popular cars." (According to United States Environmental Protection Agency (EPA) measurements, the cavernous Chrysler LHS only reached 126 cubic feet (3.6 m³).) With the optional bulging trunk lid, the Hudsons could store 21 cubic feet (0.59 m³) of luggage (the LHS, 19 cubic feet (0.54 m³)), though that might have been an optimistic measurement. The 1936 engines were powerful for the time, from 93 hp (69 kW) to 124 hp (92 kW).

The 1939 models joined other American cars in the use of a column-mounted gearshift lever. This freed front-seat passenger space and remained the industry standard through the 1960s, when "bucket seats" came into vogue. For 1940 Hudson introduced coil spring independent front suspension, aircraft style shock absorbers mounted within the front springs and true center-point steering on all its models, a major advance in performance among cars in this price range. In 1942, perhaps in response to General Motors' Hydramatic automatic transmission, Hudson introduced its "Drive-Master" system. Drive-Master was a more sophisticated combination of the concepts used in the Electric Hand and the automatic clutch. At the touch of a button, Drive-Master offered the driver a choice of three modes of operation: (1) Ordinary, manual shifting and clutching; (2) Manual shifting with automatic clutching, and (3) Automatic shifting with automatic clutching. All this was accomplished by a large and very complicated mechanism located under the hood. They worked well, and in fully automatic mode served as a good semi-automatic transmission. When coupled with an automatic overdrive, Drive-Master became known as Super-Matic. Drive-Master was offered by Hudson through the 1950 model year.

Despite all these changes, Hudson sales for 1940 were lower than 1939 and the company lost money again. The advent of military contracts the following year brought relief.

In 1951, when General Motors made its Hydramatic available to all other carmakers, Hudson replaced Drive-Master and Super-Matic with Hydramatic.

Female designer

Hudson Motor Company, wanting a female perspective on automotive design, hired Elizabeth Ann Thatcher, who later became Betty Thatcher Oros, in 1939. A graduate of the Cleveland School of Arts, now Cleveland Institute of Art,[8] and major in Industrial Design, she became America's first female automotive designer.[8][9][10] Her contributions to the 1941 Hudson included exterior trim with side lighting, interior instrument panel, interiors and interior trim fabrics.[8] She designed for Hudson from 1939 into 1941, leaving the company when she married Joe Oros, then a designer for Cadillac. He later achieved renown as head of the design team at Ford that created the Mustang.

World War II

As ordered by the Federal government, Hudson ceased auto production from 1942 until 1945 in order to manufacture materiel during World War II, including aircraft parts and naval engines, and anti-aircraft guns. The Hudson "Invader" engine powered many of the landing craft used on the D-Day invasion of Normandy, June 6, 1944.

During World War II Hudson had also an aircraft division which produced ailerons for one large eastern airplane builder.[11] The plant was capable of large scale production of wings and ailerons as well as other airplane parts. On May 22, 1941, Hudson was given a contract for the Oerlikon 20 mm cannon with the Jefferson Avenue Plant responsible to convert the original Swiss drawings to American production standards.[12] The company produced 33,201 Oerlikons for the United States Navy with the original mechanism continued in use without major change and with complete inter-changeability of parts until the end of the war.[12] Hudson also manufactured millions of other weaponry and vehicle parts for the war effort.


1947 Commodore Eight Convertible

1949 Hudson Commodore 4-Door Sedan

1952 Hudson

Production resumed after the war and included a 128 in (3,251 mm) wheelbase 3/4-ton pickup truck.[13]

In 1948, the company launched their "step-down" bodies, which lasted through the 1954 model year. The term step-down referred to Hudson's placement of the passenger compartment down inside the perimeter of the frame; riders stepped down into a floor that was surrounded by the perimeter of the car's frame. The result was not only a safer car, and greater passenger comfort as well, but, through a lower center of gravity, an extremely well-handling car. In time almost all US automakers would embrace it as a means of building bodies. Automotive writer and authority Richard Langworth has written glowingly of the early step-down models stating that "they're one (sic) of greatest" autos of the era in articles for Consumer Guide and Collectible Automobile.

Hudson's strong, light-weight bodies, combined with its high-torque inline six-cylinder engine technology made the company's 1951–54 Hornet an auto racing champion, dominating NASCAR in 1951, 1952, 1953, and 1954. Some NASCAR records set by Hudson in the 1950s (e.g. consecutive wins in one racing season) still stand even today. Later, these cars met with some success in drag racing, where their high power-to-weight ratio worked to their advantage. Hudsons enjoyed success both in NHRA (National Hot Rod Assoc.) trials and local dirt track events well into the 1960s. (Hudsons continue to set top-speed records in their class at the Bonneville Salt Flats.)

Like many other smaller North American auto manufacturers, Hudson found it increasingly difficult to compete with the Big Three (Ford, GM and Chrysler) during the 1950s. Those large companies could afford constant development and styling changes, so that their cars looked fresh every year, whereas the smaller manufacturers could only afford gradual change. Hudson's once innovative "step-down" unit body construction, while sturdy and innovative, also made restyling difficult and expensive. Although Hudsons dominated racing during this period, their feats did little to affect showroom traffic. Sales fell each year from 1951-54 and only Korean War military contracts kept the company afloat. After the company's high-priced Jet compact car line failed to capture buyers in its second straight year, Hudson was acquired by Nash-Kelvinator (makers of Nash and Rambler) automobiles in 1954.


1951 Hornet Club Coupé

1957 Hornet Series 80 4-Door Sedan

On January 14, 1954, Hudson merged with Nash-Kelvinator Corporation to become American Motors. The Hudson factory, located in Detroit, Michigan, was converted to military contract production at the end of the model year, and the remaining three years of Hudson production took place in Kenosha, Wisconsin.

For 1955, both Hudson and Nash senior models were built on a common automobile platform using styling themes by Pinin Farina, Edmund E. Anderson, and Frank Spring. (Common-body shell production for competing makes of automobiles is a manufacturing technique used by the Big Three for decades.) Although the 1955 Hudson used the inner body shell of the Nash, the car incorporated a front cowl originally designed by Spring and the Hudson team to be put on the 1954 Step-Down platform. The 1955s also used the Hudson dashboard, "triple safe brakes" and Nash Weather Eye heater with Harrison-supplied lower cost freon/compressor type air conditioning.

Hudson dealers also sold Rambler and Metropolitan models under the Hudson brand. When sold by Hudson dealers, both cars were identified as Hudson vehicles via hood/grille emblems and horn buttons. Hudson Ramblers also received "H" symbols on fuel filler caps (and, in 1956, also on hubcaps). For 1957, Rambler and Metropolitan became makes in their own rights, and no longer were identified as Hudson or Nash.

For 1956, design of the senior Hudsons was given over to designer Richard Arbib, which resulted in the "V-Line" styling motif, a combination of "V" motifs that carried Hudson’s triangular corporate logo theme. Sales fell below 1955 figures. For 1957, Hudson dropped the shorter-wheelbase Wasp line, selling only the Hornet Custom and Super, which featured a lowered profile and slightly updated styling.

With a wider front track than Nash used, Hudson was the better handling car, and was powered by the famed 308 cu in (5.0 L) Hornet Six with the optional high-compression cylinder head and dual-carburetor manifold ("Twin-H Power"); the Twin H would disappear at the end of the 1956 model year.[14]

The Wasp used the 202 cu in (3.3 L) L-head Jet Six engine (up to 130 hp (97 kW)) and this model (in sedan version) was Hudson's top seller. For 1955, for the first time Hudson offered a V8 engine, a Packard-designed and -built[15] 320 cu in (5.2 L) engine rated at 208 hp (155 kW) purchased by Hudson and Nash. All cars with the Packard V8 also used Packard's Ultramatic automatic transmission [16][17] (as a US$494 option);[15] the Nash 3-speed manual was also available at US$295.[18]

End of the line

The last Hudson rolled off the Kenosha assembly line on June 25, 1957. There were no ceremonies, because at that point there was still hope of continuing the Hudson and Nash names into the 1958 model year on the Rambler chassis as deluxe, longer-wheelbase senior models. The combined Nash and Hudson production volume was not sufficient to justify all new design and tooling, so the Rambler's platform was expected to be adopted to the longer cars.[19] One major trade magazine said rumors of discontinuance were false and the 1958 Hudsons and Nashes "would be big and smart". Factory styling photographs show designs for a 1958 Hudson (and Nash) line based on a longer-wheelbase 1958 Rambler. Front-end prototype photos show separate Hudson and Nash styling themes.

AMC's President George W. Romney came to the conclusion that the only way to compete with the "Big Three" (General Motors, Ford, and Chrysler) was to stake the future of AMC on a new smaller-sized car line.[20] Neither Hudson nor Nash brand names had as much positive market recognition as the successful Rambler and their sales were lagging. Together with AMC's chief engineer Meade Moore, Romney had completely phased out the Nash and Hudson brands at the end of 1957. The decision to retire the brands came so quickly that preproduction photographs of the eventual 1958 Rambler Ambassador show both Nash- and Hudson-badged versions. The Rambler brand was selected for further development and promotion while focusing exclusively on compact cars.[21]

Eventually, however, something close to the Hudson design was chosen for the 1958 Rambler Ambassador. Hudson brand enthusiasts will note the triangular grille guard and 1957-like fender "gun sights" and the fast-selling 1958 Rambler Customs wore 1957 Hudson-styled front-fender trim.

South Africa

Hudson cars were assembled from complete knock down (CKD) kits in South Africa by Stanley Motors in Natalspruit (Gauteng).[10]


The last Hudson dealership in the world was Miller Motors in Ypsilanti, Michigan.[22] It is now the Ypsilanti Automotive Heritage Museum, part of the Motor Cities Automotive National Heritage Area. A fine collection of restored Hudsons, including the original Fabulous Hudson Hornet, and other area production cars can be found at the museum.

AMC Hornet

In 1970, American Motors Corporation (AMC) revived the "Hornet" model name for its new series of compact cars (the AMC Hornet). AMC was later purchased by Chrysler Corporation, which at one time considered reintroducing the Hornet name in the Dodge model line (See: Dodge Hornet).

See also

  • Essex
  • Fabulous Hudson Hornet
  • Hudson Commodore
  • Hudson Super-Six Coach
  • Hudson Utility Coupe
  • Terraplane (car)


  1. (1922) The City of Detroit, Michigan, 1701-1922. S. J. Clarke Publishing, 583. 
  2. Cars & Parts 42: 64. 1999. 
  3. Long, John C. (2004). Roy D. Chapin: the man behind the Hudson Motor Car Company. Wayne State University Press, 98. ISBN 978-0-8143-3184-2. Retrieved on 18 February 2012. 
  4. "Ealing and Brentford: Economic history", A History of the County of Middlesex (Victoria County History) 7: 131–144. 1982, Retrieved on . 
  5. Poremba, David Lee (2003). Detroit: A Motor City History. Arcadia Publishing SC, 116. ISBN 978-0-7385-2435-1. Retrieved on 18 February 2012. 
  6. Georgano, G.N. (2002). Cars: Early and Vintage, 1886-1930. Mason Crest Publishers. ISBN 978-1-59084-491-5. 
  7. Greater London Council, The West London Report, London: Greater London Council, circa 1983.
  8. 8.0 8.1 8.2 "Obituary Elizabeth Anna (Betty) Oros" (in Romanian). (2001). Retrieved on 18 February 2012.
  9. "A Moment With Joe & Betty Oros", Mustang Monthly. 24 June 2009, Retrieved on . 
  10. 10.0 10.1 "Hudson Commodore Six: The History". Franschhoek Motor Museum, South Africa. Retrieved on 18 February 2012.
  11. "Hudson ships ailerons" (15 May 1941), p. 5. Retrieved on 18 February 2012. 
  12. 12.0 12.1 "20mm Antiaircraft Gun Chapter V". HyperWar Foundation. Retrieved on 18 February 2012.
  13. Vance, Bill (22 May 2009). "Motoring Memories: Hudson Trucks, 1914–1957". Canadian Driver. Retrieved on 18 February 2012.
  14. Flory, Jr., J. "Kelly" (2004). American Cars, 1960-1972: Every Model, Year by Year. McFarland & Company, 700. ISBN 978-0-7864-1273-0. 
  15. 15.0 15.1 Flory, p. 672.
  16. (1985) The Standard Catalogue of American Cars 1805-1942, 2nd, Krause Publications. ISBN 978-0-87341-111-0. 
  17. Dawes, Nathaniel D. (1975). The Packard: 1942-1962. A. S. Barnes. ISBN 978-0-498-01353-9. 
  18. Flory, p.672.
  19. Railton, Art (April 1957), "Detroit Listening Post", Popular Mechanics 107(4): 99, Retrieved on . 
  20. "Gamble on the Rambler" (19 December 1955). Retrieved on 18 February 2012. 
  21. Auto Editors of Consumer Guide (28 August 2007). "1950–1952 Rambler: The Low-Priced Rambler". Retrieved on 18 February 2012.
  22. Blumberg, George P. (11 April 2003). "Driving; Hudsons Survive. The Dealer Does, Too". Retrieved on 18 February 2012. 
Smallwikipedialogo.png This page uses some content from Wikipedia. The original article was at Hudson Motor Car Company. The list of authors can be seen in the page history. As with Tractor & Construction Plant Wiki, the text of Wikipedia is available under the Creative Commons by Attribution License and/or GNU Free Documentation License. Please check page history for when the original article was copied to Wikia

External links

Wikimedia Commons has media related to: